| Size: | |
|---|---|
| Availability: | |
| Quantity: | |
NCROPE-SRK-Series
New Coast
The NCROPE SRK Series is a matched recovery kit built around a 12-strand UHMWPE soft shackle and a hard-anodized 6061-T6 aluminum recovery ring. The soft shackle is hand-spliced with a bury-and-diamond-knot construction, forming a closed loop with no metal pin, no threaded gate and no shackle bow to bend or seize. Because UHMWPE has a very high strength-to-weight ratio, the shackle delivers load capacity comparable to steel hardware at a fraction of the weight — and if it is ever overloaded, the fiber fails without producing heavy metal fragments. The recovery ring provides a smooth, large-radius bearing surface for winch line, kinetic rope or sheave line, replacing a conventional snatch block with a compact, corrosion-resistant component that will not seize or require lubrication.
Each kit is assembled and inspected as a matched set: the soft shackle is proof-loaded and checked for splice symmetry, the ring is inspected for bore finish and anodizing integrity, and the components are packed with an abrasion-resistant protective sleeve and a storage bag. Kit configuration, shackle diameter, ring size and color can be specified to match a vehicle class or fleet standard. NCROPE controls filament sourcing, braiding, splicing, hardware finishing and kit packing in one process, which keeps break strengths, dimensions and color consistent across production batches and supports private-label packaging for distributors and off-road brands.
High-Strength UHMWPE Soft Shackle : The shackle is spliced from 12-strand UHMWPE, a fiber with an exceptional strength-to-weight ratio. A closed-loop construction with diamond knot eliminates the metal pin and gate found on steel shackles. The result is high capacity at low weight, with no pin to lose, seize or become a projectile.
Safe Failure Behavior : If the soft shackle is overloaded, the synthetic fiber absorbs energy and fails without throwing heavy metal hardware. This reduces the risk of injury and vehicle damage during recovery. The soft body also will not scratch painted bumpers, wheels or coated winch lines.
Hard-Anodized Recovery Ring : The 6061-T6 aluminum ring is hard anodized for wear and corrosion resistance, with a smooth, large-radius bore that lowers friction on rope and line. It replaces a heavier snatch block and requires no lubrication or moving parts. The ring will not seize, rust or develop a sharp edge in sand, mud or saltwater use.
Matched Kit Configuration : Shackle diameter and ring size are selected as a matched pair so the assembly works within a defined load range. Each kit is assembled, inspected and packed as a complete set rather than loose components. Clear sizing avoids mismatched hardware in the field.
Protective Sleeve and Storage Bag : An abrasion-resistant sleeve shields the soft shackle body from sharp edges, hot surfaces and chafe at the ring. A compact storage bag keeps the kit together and protects the splice during transport. Both parts are included, so the kit is ready to use out of the box.
Lightweight, Corrosion-Free Construction : The complete kit weighs a fraction of equivalent steel shackle and block hardware, reducing payload and storage burden. Neither component rusts, so the kit can be stored wet without maintenance. This suits marine, coastal and off-road use where steel hardware degrades.
Custom Colors and Private Label : Soft shackle colors can be matched to a brand or fleet code, and ring anodizing is available in standard finishes. Kit contents, bag design, labels and retail packaging can be customized. Private-label programs are supported for distributors and off-road accessory brands.
UHMWPE soft shackle delivers high strength at a fraction of steel hardware weight.
No metal pin or gate to lose, seize, bend or become a projectile under load.
Hard-anodized 6061-T6 ring resists corrosion and needs no lubrication.
Smooth, large-radius ring bore lowers friction and rope wear during pulls.
Matched shackle and ring sizing keeps the kit within a defined load range.
Abrasion-resistant sleeve and storage bag included for field protection.
Complete kit is lighter and more compact than a steel shackle and snatch block.
Custom colors, kit contents and private-label packaging available for OEM programs.
4x4 and Off-Road Recovery : Winch extensions, tree-saver connections and snatch-ring setups for trail recovery.
Kinetic Recovery Systems : Connecting kinetic recovery ropes to vehicle recovery points without steel shackle weight.
Winch Line Extensions : Joining winch line to extension ropes or anchor straps through a low-friction ring.
Marine and Coastal Recovery : Corrosion-free recovery hardware for boat trailers, ramps and beach launches.
Utility and Fleet Vehicles : Lightweight recovery kits for service trucks, ATVs, UTVs and agricultural equipment.
Rigging and Suspension : Soft connections for temporary rigging, load guidance and line redirection where metal hardware is undesirable.
| Parameter | Specification |
|---|---|
| Soft Shackle Material | 12-strand UHMWPE (SK78 grade) |
| Soft Shackle Construction | Hand-spliced closed loop with diamond knot |
| Soft Shackle Diameters | 8 mm / 10 mm / 12 mm |
| Soft Shackle Lengths | 400 mm / 500 mm / 600 mm |
| Soft Shackle MBS | 8 mm ≥ 40 kN; 10 mm ≥ 60 kN; 12 mm ≥ 85 kN |
| Splice Efficiency | Approx. 60% – 70% of line strength |
| Recovery Ring Material | 6061-T6 aluminum, hard anodized |
| Ring Sizes | 100 mm OD / 32 mm ID; 115 mm OD / 38 mm ID |
| Ring Rated Capacity | 15,000 lb (approx. 6.8 t) working load, matched to shackle size |
| Ring Weight | 250 g (100 mm); 380 g (115 mm) |
| Protective Sleeve | Abrasion-resistant polyester sleeve |
| UV Resistance | UV-stabilized UHMWPE, suitable for outdoor storage |
| Operating Temperature | -20 °C to +70 °C |
| Kit Contents | 1 soft shackle, 1 recovery ring, 1 sleeve, 1 storage bag |
| Packing | Mesh bag or retail box; custom packaging available |
| MOQ | 200 kits per size and color |
NCROPE manufactures braided rope and synthetic recovery hardware for off-road, marine and utility distributors. We control filament sourcing, 12-strand braiding, hand splicing, ring finishing and kit assembly under one quality system, which lets us hold break strengths, splice dimensions and color consistency across production batches.
In-house 12-strand UHMWPE braiding and hand splicing with splice symmetry checks
Proof loading and batch testing of soft shackles and ring bore finish
Matched shackle and ring sizing to keep kits within a defined load range
Custom colors, anodized finishes, kit contents and private-label packaging
Compact, export-ready packing for distributor and retail programs
Experience supplying recovery and marine accessory brands with repeatable specifications
Contact NCROPE today for a quotation on soft shackle and recovery ring kits, or send your required shackle diameter, ring size and kit configuration for a sample evaluation.