| Availability: | |
|---|---|
| Quantity: | |
NCROPE-FHA8H-Series
New Coast
The NCROPE FHA8H Series is an eight-strand hollow braided anchor line built from UV-stabilized polyolefin filaments for small-craft anchoring. Unlike a sinking rode that disappears below the boat and can foul the propeller or wrap around underwater hazards, this line remains positively buoyant at a specific gravity of approximately 0.90–0.95. The coreless hollow braid produces a round, firm rope with balanced load distribution across all eight strands, low twist and a soft hand that feeds smoothly through bow rollers and cleats. One end is hand-spliced into a compact eye and fitted with a spring hook, allowing the anchor, bridle or deck fitting to be connected and released in seconds without knots or shackle tools.
Each line is braided on high-speed equipment with in-line tension and diameter control, then spliced and finished by hand before inspection. Batch testing covers breaking strength, specific gravity, hook seating and splice efficiency, so the finished anchor line performs predictably from the first use. We supply standard lengths of 15 m, 30 m, 50 m and 100 m, with cut-to-order lengths, thimbles, stainless or galvanized hooks, custom colors, labels and retail packaging available. In-house braiding, splicing and hardware assembly keep tolerances repeatable and lead times predictable for distributors and OEM brands.
Buoyant Anchor Rode : The polyolefin construction keeps the line floating even when fully wet, so the rode stays visible and clear of the propeller and lower unit. Water absorption remains under 1%, preventing the gradual weight gain that turns other lines into sinking rodes. Retrieval is easier and the risk of fouling underwater structure is reduced.
Spring Hook Termination : A galvanized or stainless steel spring hook is attached through a hand-spliced eye, giving a fast, tool-free connection to the anchor or bridle. The spring gate allows one-handed attachment and release, which is useful when anchoring from a small boat in choppy water. Hook size is matched to the rope diameter to avoid side loading and point wear.
True 8-Strand Hollow Braid : Eight balanced strands form a coreless hollow structure with no separate jacket to trap water or separate in service. Load is spread evenly across the braid, producing stable strength and a round profile under tension. The hollow center allows quick splicing, eye forming and field repair with simple hand tools.
UV-Stabilized Filaments : UV stabilizers are compounded into the filaments to slow sunlight aging during seasonal outdoor use. Strength and color retention are maintained through repeated exposure on open decks and in storage. This extends service life compared with untreated floating ropes.
Soft, Tangle-Resistant Handling : The hollow braid stays supple at low temperatures and resists kinking when coiled or stowed in a locker. It runs freely through bow rollers and fairleads and is comfortable to pull by hand. Light weight reduces fatigue when setting and recovering the anchor repeatedly.
Optional Thimble and Eye Sizes : Spliced eyes can be supplied with stainless or galvanized thimbles, or in custom eye sizes to suit specific anchor shanks and deck fittings. Splices are formed inside the hollow core without metal ferrules, eliminating sharp edges and point loading. Eye length and splice taper are matched to the rope diameter and intended working load.
Custom Diameter, Length and Color : Standard diameters range from 8 mm to 16 mm, with custom sizes up to 24 mm. Lengths are cut to 15 m, 30 m, 50 m, 100 m or any specified figure, and colors can be matched to a fleet or brand code. Labels, header cards and retail packaging are available for OEM programs.
Floats permanently to keep the anchor rode visible and away from propellers and underwater hazards.
Hand-spliced eye with spring hook provides fast, tool-free connection and release at the anchor.
Eight-strand hollow braid distributes load evenly for stable strength and a round profile.
Water absorption below 1% prevents weight gain, stiffening and loss of buoyancy over time.
UV-stabilized polyolefin resists sunlight aging and retains color through outdoor service.
Coreless construction allows fast splicing, eye sizing and field repair without special tools.
Standard 15 m to 100 m lengths plus custom cuts, colors, thimbles and retail packaging.
Inflatable and Dinghy Anchoring : Light floating rodes for tenders and inflatables where a sinking line would foul the outboard or disappear under the boat.
Kayak and Canoe Anchoring : Compact anchor lines with a quick-connect hook for kayak anglers and paddlers working shallow water.
Personal Watercraft : Short floating anchor lines for jet skis and PWCs, keeping the rode on the surface and easy to recover.
Small Boat Mooring and Bridles : Floating bridle and mooring lines for temporary tie-offs, beach anchoring and short-stay holding.
Marker and Utility Lines : Buoyant lines used to mark anchor position, gear or swim boundaries around small craft.
OEM Boat Packages : Private-label anchor line kits supplied with hooks, thimbles, labels and retail packaging.
| Parameter | Specification |
|---|---|
| Material | UV-stabilized polypropylene / polyolefin blend |
| Construction | 8-strand hollow braid, coreless |
| Strand Count | 8 |
| Diameter Range | 8 mm – 16 mm standard; up to 24 mm custom |
| Diameter Tolerance | ±5% |
| Standard Lengths | 15 m, 30 m, 50 m, 100 m; custom cut available |
| Specific Gravity | 0.90 – 0.95 (floats on water) |
| Water Absorption | < 1% |
| Breaking Strength | 8 mm ≥ 9 kN; 10 mm ≥ 14 kN; 12 mm ≥ 19 kN; 14 mm ≥ 26 kN; 16 mm ≥ 33 kN |
| Elongation at Break | 15% – 20% |
| Termination | Hand-spliced eye, thimble optional |
| Hardware | Galvanized steel / SS304 / SS316 spring hook, matched to diameter |
| UV Resistance | UV-stabilized, suitable for long-term outdoor exposure |
| Operating Temperature | -20 °C to +70 °C |
| Color Options | Standard colors or custom color matching |
| Packing | Coil, reel, labeled hank or retail header card |
| MOQ | 300 pcs per size and color |
NCROPE manufactures floating and specialty braided ropes with in-house braiding, splicing, hardware assembly and quality control. We supply anchor lines, dock lines and floating cordage to marine distributors, chandlers and OEM boat builders, and we control the full process from filament selection to finished, labeled product.
In-house 8-strand hollow braiding with in-line tension and diameter control
Batch testing of breaking strength, buoyancy, hook seating and splice efficiency
Galvanized, SS304 and SS316 spring hook options assembled in-house
Custom lengths, eye sizes, thimbles, labels and retail packaging
Flexible order quantities with cut-to-order service
Export experience with marine, fishing and outdoor distributors
Contact NCROPE today for a quotation on floating hollow braided anchor lines, or send your target diameter, length and hook specification for a sample evaluation.